CHARACTERISTICS Good mechanical properties Good resistance to permanent deformation for compression (compression-set) Good impermeability to air and gases Easy coloured Limited resistance to UV rays Limited dielectric properties No resistance to fuel

NIRAL 44 anti-caking has to be heated above its drop point, at temperature above 60 °C, homogenize and feed it into a vaporizing system in a mixing drum with the help of a pump. Depending on the type of the raw fertilizer vaporize 1-5 kg/tons of surface-treating substance onto the granules to smoothly cover their surface. The coating will prevent the granules from sticking and slow down the exposure of the active ingredient.

NIRAL 50 anti-caking can be used in the production of fertilizers for covering the surface of the granules in the fertilizer. It is suitable mainly for the surface-treatment of fertilizers containing nitrogen (ammonium nitrate (AN) and combined fertilizers (CAN, etc.), and blended fertilizers (NPK, DAP, etc.). The product prevents the granules from sticking even during prolonged storage

NIRAL 650 anti-caking compound can be used in the production of fertilizers for covering the surface of the granules in the fertilizer. It is suitable mainly for the surface-treatment of nitrogenous (e.g. ammonium nitrate, agronite, urea, etc.) and blended fertilizers (e.g. NPK, DAP). The product prevents the granules from sticking even during prolonged storage

Prompt delivery you can find all international measures of O-rings in the standard hardness of shore 70 in: NBR: black color EPDM: black color FPM (VITON ®): brown color NEOPRENE: black color FLUOROSILICONE: grey color LIQUID SILICONE RUBBER LSR: red / transparent color

PANCHEM 5040 is an emulsifiable oil to be used for the preparation of water based emulsion to provide anti-rust properties to galvanised products.

Powder fully water soluble It is a balanced mixture composed by synthetic salts and organic additives suitable for pre-coating of steel wire and stainless steel, for further drawing or cold heading operations.